英管外螺纹60°内锥面或六角端面组合垫密封/美制JIC螺纹74°外锥密封
英管外螺纹60°内锥面或六角端面组合垫密封/美制JIC螺纹74°外锥密封
产品详情
BSP MALE DOUBLE USE FOR 60° SEAT OR BONDED SEAL / JIC MALE 74°CONE
| 代号 | 螺纹 THREAD | 尺寸 DIMENSIONS | ||||
| PART NO. | E1 | E2 | A | B | L | S |
| 1BJ-02-04 | G1/8” ×28 | 7/16” ×20 | 10 | 14 | 30 | 14 |
| 1BJ-04 | G1/4” ×19 | 7/16” ×20 | 12 | 14 | 32 | 19 |
| 1BJ-04-05 | G1/4” ×19 | 1/2” ×20 | 12 | 14 | 32 | 19 |
| 1BJ-04-06 | G1/4” ×19 | 9/16” ×18 | 12 | 14.1 | 32 | 19 |
| 1BJ-06 | G3/8” ×19 | 9/16” ×18 | 13.5 | 14.1 | 35.5 | 22 |
| 1BJ-06-04 | G3/8” ×19 | 7/16” ×20 | 13.5 | 14 | 35.5 | 22 |
| 1BJ-06-05 | G3/8” ×19 | 1/2” ×20 | 13.5 | 14 | 35.5 | 22 |
| 1BJ-06-08 | G3/8” ×19 | 3/4” ×16 | 13.5 | 16.7 | 38.5 | 22 |
| 1BJ-08 | G1/2” ×14 | 3/4” ×16 | 16 | 16.7 | 43 | 27 |
| 1BJ-08-06 | G1/2” ×14 | 9/16” ×18 | 16 | 14.1 | 40 | 27 |
| 1BJ-08-10 | G1/2” ×14 | 7/8” ×14 | 16 | 19.3 | 45.5 | 27 |
| 1BJ-08-12 | G1/2” ×14 | 1-1/16” ×12 | 16 | 21.9 | 48 | 30 |
| 1BJ-10 | G5/8” ×14 | 7/8” ×14 | 17.5 | 19.3 | 47 | 30 |
| 1BJ-10-08 | G5/8” ×14 | 3/4” ×16 | 17.5 | 16.7 | 44 | 30 |
| 1BJ-10-12 | G5/8” ×14 | 1-1/16” ×12 | 17.5 | 21.9 | 49.5 | 30 |
| 1BJ-10-16 | G5/8” ×14 | 1-5/16” ×12 | 17.5 | 23.1 | 51.5 | 36 |
| 1BJ-12 | G3/4” ×14 | 1-1/16” ×12 | 18.5 | 21.9 | 51.5 | 32 |
| 1BJ-12-08 | G3/4” ×14 | 3/4” ×16 | 18.5 | 16.7 | 46.5 | 32 |
| 1BJ-12-10 | G3/4” ×14 | 7/8” ×14 | 18.5 | 19.3 | 49 | 32 |
| 1BJ-12-14 | G3/4” ×14 | 1-3/16” ×12 | 18.5 | 22.6 | 52 | 32 |
| 1BJ-12-16 | G3/4” ×14 | 1-5/16” ×12 | 18.5 | 23.1 | 52.5 | 34 |
| 1BJ-16 | G1” ×11 | 1-5/16” ×12 | 20.5 | 23.1 | 57 | 41 |
| 1BJ-16-12 | G1” ×11 | 1-1/16” ×12 | 20.5 | 21.9 | 55.5 | 41 |
| 1BJ-16-14 | G1” ×11 | 1-3/16” ×12 | 20.5 | 22.6 | 56 | 41 |
| 1BJ-16-20 | G1” ×11 | 1-5/8” ×12 | 20.5 | 24.3 | 58 | 46 |
| 1BJ-20 | G1-1/4” ×11 | 1-5/8” ×12 | 20.5 | 24.3 | 62 | 50 |
| 1BJ-20-16 | G1-1/4” ×11 | 1-5/16” ×12 | 20.5 | 23.1 | 60.5 | 50 |
| 1BJ-20-24 | G1-1/4” ×11 | 1-7/8” ×12 | 20.5 | 27.5 | 63 | 50 |
| 1BJ-24 | G1-1/2” ×11 | 1-7/8” ×12 | 23 | 27.5 | 67.5 | 55 |
| 1BJ-24-20 | G1-1/2” ×11 | 1-5/8” ×12 | 23 | 24.3 | 62.5 | 55 |
| 1BJ-24-32 | G1-1/2” ×11 | 2-1/2” ×12 | 23 | 33.9 | 74 | 65 |
| 1BJ-32 | G2” ×11 | 2-1/2” ×12 | 25.5 | 33.9 | 77.5 | 70 |
| 1BJ-32-24 | G2” ×11 | 1-7/8” ×12 | 25.5 | 27.5 | 70 | 70 |
注：螺母和衬套需另行定货。管子直径为公制时，配用螺母及衬套分别选用NB200、NB500。管子直径为英制时，配用螺母及衬套分别选用NB200、NB300。
Note：Nut and sleeve should be ordered separately .The nut NB200 and sleeve NB500 is suitable for metric tube ,the nut NB200 and sleeve NB300 is suitable for inch tube .
进口两层不剥胶套筒 00210
进口两层不剥胶套筒 3310
进口一层不剥胶套筒 00110-A
进口一层不剥胶套筒 00110联系我们
宁波海曼科机械有限公司
地址: 宁波市鄞州区茅山镇钱家桥
联系人:胡经理
联系电话:
+86-574-88051970
传真: +86-574-88051920
邮箱: hmk@haimake.com.cn
